Back to XB Portal


Read more about Buell History

Wild Customprojects

Racing, racing, racing

Blow me up Scotty

Back to start

About this site

Hillbilly Custom n race Banner

New Raceparts


Superlightweight Aluminium Billet Motorsprocket

Highperformance Engines always have one enemy: The weight of the rotating masses. Special at the crankshaft all weight counts multiple. This Motorsprockets are milled out of one full block of Aircraftaluminium, they are hardanodised and they came in various sizes. Now you can calculate your own ratios beginning at the primary drive. No more bad ratio compromises because of problems on the secondary drive side. The sprockets have holes and threads to accept alternator rotor. We also offer Primary Chains in all length.

Superlightweight Aluminium Billet Clutch Basket  Nr./Theeth

Now we offer also an Aluminium Clutch Basket milled out of best and strongest Aircraft Aluminuim. The Startersprocket ist made in Steel, we deliver the Clutchbasket with or without Startersprocket. Fits with all OEM and Aftermarketparts in OEM Specifications.


Ballanced lightweight Crankshafts for all Buell / HD

No Highperformance Engine will resist longer time the vibrations of a OEM Crankshaft. Earlyer or later any serious Racer ask for a balanced Crankshaft. We offer now ready balanced Crankshafts based on new OEM Parts. The Crankshafts are lighter, balanced and kniveedged for less Oilsplashing. Also available is polishing of stock Conrods or you can order Carrillo Rods. All Crankshafts are made on Request based on your needs and engine specifications. Prices starting at 1.300 €. Ask us for an detailed offer.

Superlightweight Aluminium Billet Frontsprocket Nr./Theeth

Most Buell Tubeframe or XB Racebikes are converted to secondary Chaindrive. The original OEM Beltdrive is difficult in changing the Ratio and also sometimes not strong enough. Rearsprockets for chaindrive are easy to made in Aluminium (we also offer them) but the Frontsprocket was all time a problem to get in a Lightweight Version. We are very happy that we could offer now a bigger variance of Sprockets in strong Aircraft Aluminium, hardanodised, with or without Offset in 520 or 530. Tell us what you need,

Aluminium Single Collapssible Pushrod Covers

XL or Tubeframeriders who use adjustable Pushrods wont live without them. XB Riders cant live without them! On the XBs it is impossible to remove the OEM Plastic Pushrodcovers without taking away Cylinderhead and Cylinder. These collapsible Covers are great benefit in Street and Racing because they allow to adjust the pushrods or swap the lifters, without opening the engine. They wont leak because the construction is made by one of the best companys on the market. And of course they are looking cool in polished Aluminium. Complete Set, also available in longer for Stroker Engines.

Superlightweight Aluminium Billet Frontsprocket Nr./Theeth

For these who use the original OEM Beltdrive we are very happy that we could offer now a variance of Front Beltsprockets in strong Aircraft Aluminium, hardanodised, with or without Offset. Theeth and Offsets coming soon on the site.


View all Raceparts >>>

We would like to point out that the Names of Buell™ and Harley-Davidson™, EVO™, Evolution™, Sportster™, V-Rod™, TwinCam™, Ulysses™, Firebolt™, Lightning, White Lightning™ as well as many other trademarks and logos are mentioned on our pages are the property of the respective companys and they are used from us in the acception of their rights only to precise the usability of our offers . We are not an authorized Dealer of Buell™ or Harley-Davidson™. All content , pictures, design and the sitectructure of thisWebsite stand under our copyrights.